Filling a Paintball Tank How-To with Air Compressor

How to Fill a Paintball Tank With an Air Compressor

An air compressor is a useful tool for filling your paintball tank in a shorter period of time than relying on a hand pump or a scuba tank all-together. It can also save you time and money while providing a reliable and cost-effective way of keeping your paintball tank pressurized. Many force-fed air compressors come with preset PSI settings and pressure gauges for stirring CO2 to keep a reliable pressure level.

Step 1: Set up Your Compressor

Before you look to pressurize your paintball tank, ensure that the air compressor is properly set up and attached to an adequate power outlet. Once the machines connected to a safe power source, make sure all lines are connected correctly and pressurize the tank slowly and with caution, keeping your eyes fixed on the pressure gauge.

Step 2: Start Filling your Paintball Tank

Once the air compressor is operating efficiently, attach the fill line to the tank while ensuring that it is watertight. Select your preset PSI and adjust the pressure gauge. Monitor and observe the pressure gauge and stop the operation once you reach the desired pressure and use the air compressors regulator to precisely set the impeller side PSI.

Step 3: Check and Replace Parts

Once the tank is filled and the pressure is reliable, be sure to check for leaking or faulty parts. Inspect the fill line for any tears or sections that need to be replaced.

Step 4: Store Tank in the Right Way

When you're done pressurizing your paintball tank, always remember to turn the pressure regulator knob to zero before storing the tank. Storing the tank correctly helps to guarantee longer life and resilience.

Safety Reminders

Before proceeding, always do a quick pressure check with an air gauge to make sure that the tank is completely clear of all pressure. Should the pressure gauge indicate any pressure build-up, use a blast valve or similar release mechanism before proceeding to avoid injuries. The valve should be used to release all built-up pressure before handling the tank.

Brief Recap

The key to filling a paintball tank with an air compressor is to find the best balance between pressurizing the tank and ensuring that the parts remain in optimum condition. Always remember to keep a eye on the pressure gauge and replace any faulty or ripped parts to keep your paintball tank pressurized for as long as possible.

Whether you rely on a scuba tank or an air compressor, a good filling job makes a world of difference to your paintball tank's performance. Use these few tips to get the job done right, and perhaps save yourself some time and money in the process.